Power Supply
Guitar amplifiers are always an interesting challenge. The tone controls, gain and overload characteristics are very individual, and the ideal combination varies from one guitarist to the next, and from one guitar to the next. There is no amp that satisfies everyone’s requirements, and this offering is not expected to be an exception.
One major difference however, is that if you build it yourself, you can modify things to suit your own needs, experimentation is the key to this circuit, which is presented in basic form, with every expectation that builders will modify just about everything.
The amp is rated at 100W into a 4 Ohms load, as this is typical of a “combo” type amp with two 8 Ohm speakers in parallel. Alternatively, you can run the amp into a “quad” box (4 x 8 Ohm speakers in series parallel – see Figure 5) and will get about 60 Watts. For the really adventurous, 2 quad boxes and the amp head will provide 100W, but will be much louder than the twin. This is a common combination for guitarists, but it does make it hard for the sound guy to bring everything else up to the same level.
Pre-Amp
Guitar Power Amplifier